2010 Dodge Challenger Oil Filter: Specs & Service

The 2010 Dodge Challenger uses a V6 or V8 engine ranging from 3.5 to 6.1 liters, making clean, properly filtered oil important to long-term engine operation. At Larry H. Miller Dodge Ram Peoria in Peoria, AZ, an oil filter service matches a new filter to the engine actually fitted, replaces the drain plug gasket or washer where the engine uses one, and checks the filter seal for leaks after the engine runs. The filter captures debris carried by the oil, so replacing it alongside the oil helps maintain clean oil circulation. Drivers can schedule service for their 2010 Dodge Challenger at the dealership's Peoria service center.

What an oil filter replacement on a 2010 Dodge Challenger involves

An oil filter replacement for a 2010 Dodge Challenger begins with selecting a filter matched to the engine's specification. Because this model was offered with engine sizes from 3.5 to 6.1 liters and six or eight cylinders, the correct filter is determined by the engine actually fitted to the vehicle rather than by the model name alone. The filter is replaced alongside the engine oil so the fresh oil is not immediately circulated through an already loaded filter.

The service also includes a new drain plug gasket or washer where that engine uses one. Renewing the sealing component helps support a sound seal when the drain plug is reinstalled. After the engine has been run, the filter seal is checked for leaks. This final check helps confirm that the filter and related sealing surfaces are secure. To have the correct filter installed with the oil, schedule service at Larry H. Miller Dodge Ram Peoria.

Why the filter matters on a 2010 Dodge Challenger

The 2010 Dodge Challenger uses V6 and V8 engines with displacement ranging from 3,518 to 6,059 cc. As engine oil moves through those six- or eight-cylinder powertrains, it carries away particles and other debris created during normal operation. The oil filter holds that debris instead of allowing it to continue circulating through the engine.

A filter can eventually load with the material it has captured. Once it loads, the bypass valve opens and oil circulates unfiltered. That means a loaded filter does not stop the engine from getting oil; it stops the engine from getting filtered oil, which is a quieter but important loss of protection. For that reason, the filter is replaced with the oil rather than stretched across two changes. The manufacturer's maintenance schedule sets no interval for this model year, so service history and inspection help determine when attention is appropriate.

Oil and filter service at Larry H. Miller Dodge Ram Peoria

Larry H. Miller Dodge Ram Peoria provides oil filter service for the 2010 Dodge Challenger at 8665 West Bell Road, Peoria, AZ 85382. The service is centered on the engine actually fitted to the vehicle: the filter is matched to that engine, the applicable drain plug gasket or washer is renewed, and the filter seal is checked after the engine runs. This approach addresses the filter's role in holding debris carried by the oil while keeping the work focused on the components covered by the service.

Drivers can schedule an appointment online or contact the dealership at 623-400-7471. Before booking, vehicle service history and an inspection can help establish the appropriate timing for the next oil and filter service. Customers can also review service specials before arranging a visit to the Peoria service center.