2014 Ram C/V Tradesman Alignment: Specs & Service

The manufacturer’s maintenance schedule has no stated alignment interval for this model year. For a 2014 Ram C/V Tradesman in Peoria, an inspection is sensible when driving conditions or symptoms suggest the wheels may no longer be within specification.

• Check alignment after suspension or steering component replacement.
• Consider an inspection after a major pothole impact.
• Measure the angles before paying for an adjustment.

Wheels that are out of alignment can scrub the tires as the vehicle rolls, wearing the tread unevenly. Larry H. Miller Dodge Ram Peoria can measure all four wheel angles and inspect the tires, steering, and suspension for conditions that could hold an alignment out of specification.

• Vehicle pulls on a flat road.
• Steering wheel is not centered while driving straight.
• One edge of a tire wears faster than the other.

The inspection also covers tire condition, steering components, and suspension parts that could affect alignment results. Measuring the current angles helps show whether an adjustment is needed before work is authorized.

• Camber, caster, and toe measurement on all four wheels.
• Adjustment toward manufacturer specification where the suspension allows.
• Inspection for worn tires, steering parts, or suspension components.

A vehicle may need component inspection before an alignment can be completed correctly. The service team checks steering and suspension parts and explains the condition found, so you can determine whether adjustment alone is appropriate for your 2014 Ram C/V Tradesman.

• Inspect tie rods for wear or looseness.
• Check ball joints and struts before adjustment.
• Identify parts that could move the wheels back out of specification.

Tracking straight does not rule out uneven tire wear or an angle that is beginning to move out of specification. A measurement at Larry H. Miller Dodge Ram Peoria can show whether an adjustment is needed before you authorize one.

• Look for wear on one edge of a tire.
• Check whether the steering wheel sits off center.
• Request measurement after a major pothole impact.

Those measurements are compared with the manufacturer’s specification for the vehicle. The inspection also considers tire, steering, and suspension wear that may cause the angles to change or prevent an adjustment from holding.

• Measure camber on the vehicle’s wheels.
• Measure caster and toe against manufacturer specification.
• Review related tire, steering, and suspension condition.

The technician measures camber, caster, and toe on all four wheels, then compares the readings with the manufacturer’s specification. Where the suspension allows, adjustments are made toward that specification. The goal is to identify whether the vehicle needs an adjustment rather than authorizing one without measurement.

After the alignment work, the vehicle can be checked for steering feel and straight-line behavior. If worn suspension or steering components are found, the condition is explained before additional work is considered. Schedule service for your 2014 Ram C/V Tradesman or call 623-400-7471.

The service is performed at 8665 West Bell Road in Peoria, AZ 85382. Bring the vehicle in after a major pothole impact, after steering or suspension work, or when tire wear suggests a geometry problem. The inspection also helps distinguish an alignment adjustment from a worn component that must be addressed first.

Use the dealership’s schedule service link to request an appointment for your 2014 Ram C/V Tradesman. For questions about alignment service in Peoria, call 623-400-7471.

Front and rear readings are evaluated independently when applicable. A pull or uneven wear pattern may come from alignment angles, but it can also relate to tire condition or worn steering and suspension components. For that reason, the inspection includes the tires, steering, suspension, and tie rods before alignment work is completed.

The factory specification is the basis for the measurement and adjustment process; individual angle values are not reproduced here. A technician can explain the readings and whether correction is appropriate for the vehicle’s condition. Bring your 2014 Ram C/V Tradesman to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.