2016 Dodge Durango Alignment: Specs & Service

An alignment is appropriate when symptoms appear or after suspension work and a major pothole impact. Measuring the current angles shows whether the wheels remain within factory specification. This approach can help avoid paying for an adjustment that the vehicle does not need.

• Check alignment after suspension component replacement.
• Schedule an inspection after a major pothole impact.
• Watch for uneven tread wear or steering that pulls.

Misaligned wheels scrub the tires as the 2016 Dodge Durango rolls, which can accelerate uneven tread wear. A technician measures all four wheel angles to identify whether adjustment is needed. Alignment inspection also provides an opportunity to look for steering and suspension wear that can affect the result.

• Vehicle pulls on a flat road.
• Steering wheel is not centered while driving straight.
• One tire edge wears faster than the other.

The inspection includes the tires, steering, and suspension components for wear that could hold an alignment out of specification. Measuring current angles first helps identify whether an adjustment is necessary. This process addresses the alignment condition rather than assuming an adjustment is required.

• Camber, caster, and toe measurement.
• Adjustment toward manufacturer specification where possible.
• Inspection for tire, steering, and suspension wear.

The technician inspects the tires, steering, and suspension before determining whether the angles can be corrected. Components that are worn may need attention before an alignment can remain within specification. You receive information about the condition found so the next step is based on the vehicle’s needs.

• Inspect steering components for wear.
• Check suspension components that could affect alignment.
• Measure the angles before deciding on adjustment.

An alignment is not automatically necessary every time tires are serviced. It is particularly useful after a major pothole impact, suspension work, or visible uneven tire wear. Larry H. Miller Dodge Ram Peoria can measure the current angles before recommending an adjustment.

• Measure camber, caster, and toe first.
• Look for uneven wear across the tire tread.
• Adjust only where the suspension allows.

The service checks camber, caster, and toe on all four wheels, along with tires, steering, and suspension components. Measuring the current angles helps determine whether an adjustment is needed before payment for one. Use the schedule service page to request an appointment.

• Service location: 8665 West Bell Road.
• City: Peoria, Arizona.
• Phone: 623-400-7471.

Drivers in Peoria can visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road. The service is designed to establish whether an adjustment is needed before one is performed. To arrange an inspection, use the schedule service page or call 623-400-7471.

This measurement-first process helps show whether the 2016 Dodge Durango needs an adjustment before you pay for one. It also connects handling symptoms with the condition of the tires, steering, and suspension. Drivers can book the inspection through schedule service or call 623-400-7471. Larry H. Miller Dodge Ram Peoria is located at 8665 West Bell Road in Peoria, AZ.

Common concerns include a vehicle pulling to one side on a flat road, a steering wheel that sits off center while driving straight, and faster wear on one tire edge. Tire, steering, and suspension inspection is part of the alignment evaluation because wear in those areas can keep the setting out of specification. Bring your 2016 Dodge Durango to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.