2016 Ram 1500 Alignment: Specs & Service

These symptoms can indicate that one or more wheel angles are outside the manufacturer's specifications. A technician at Larry H. Miller Dodge Ram Peoria can measure all four wheels and inspect the components that influence alignment. Vibration at speed can also justify a closer inspection, although it may have more than one possible cause.

• Vehicle pulls on a flat road
• Steering wheel is not centered while driving straight
• Tread wears unevenly across a tire

The service begins with an inspection of the tires, steering, and suspension for wear that could hold the alignment out of specification. The measured angles are compared with the manufacturer's specifications before any adjustment is recommended. This approach helps identify whether the truck needs an alignment adjustment or further suspension attention.

• Camber, caster, and toe measurement
• Inspection of tires, steering, and suspension components
• Adjustment to manufacturer specification where possible

Alignment service is generally considered after symptoms appear, following suspension work, or after a major pothole impact. Uneven tire wear, pulling, or an off-center steering wheel are practical reasons to have the angles measured. Booking an inspection lets the technician compare current measurements with factory specifications before recommending an adjustment.

• Schedule an inspection after a major pothole impact
• Check alignment after suspension component replacement
• Respond to pulling or irregular tire wear

The suspension and steering inspection is an important part of alignment service because loose or worn components can change wheel angles while driving. Larry H. Miller Dodge Ram Peoria can identify conditions that may need attention before an alignment adjustment. The measurements and inspection help explain whether the truck needs alignment service alone or additional repair.

• Inspect steering and suspension components
• Look for wear that could change wheel angles
• Review the inspection before authorizing additional work

Alignment service is most useful when symptoms appear, after a major pothole impact, or following steering and suspension work. A truck that tracks straight can still receive an inspection if tire wear raises a concern. Measuring the current angles provides a fact-based answer before an adjustment is recommended.

• Check tire wear for edge or irregular patterns
• Consider measurement after suspension work
• Use current angle readings to guide the decision

The measurements show whether an adjustment is needed and support a clear service recommendation. The inspection also looks at tires, steering, and suspension components that may affect alignment results. Schedule service at Larry H. Miller Dodge Ram Peoria in Peoria for an alignment evaluation.

• Measure all four wheel angles
• Compare measurements with factory specifications
• Check components that may affect alignment

Front and rear wheel angles are evaluated as part of the four-wheel measurement process. The inspection also considers tire condition, steering components, and suspension parts that may cause an alignment to move out of specification. If a worn component prevents a lasting correction, the inspection helps identify that concern before an adjustment is recommended.

Bring your 2016 Ram 1500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Larry H. Miller Dodge Ram Peoria is located at 8665 West Bell Road, Peoria, AZ 85382. The service team measures camber, caster, and toe on all four wheels and checks the related components before recommending an adjustment. This gives drivers a clear explanation of what the measurements show and whether the suspension allows correction.

For service at the Peoria dealership, schedule an appointment or call 623-400-7471.