2016 Ram 2500 Alignment: Specs & Service

Larry H. Miller Dodge Ram Peoria provides up-front pricing after the truck’s alignment needs are evaluated. The service measures all four wheels and identifies whether adjustment is needed before you pay for an adjustment. This approach can also reveal suspension or steering wear that may prevent an alignment from holding.

• Camber, caster, and toe measurements
• Inspection of tires, steering, and suspension components
• Adjustment toward manufacturer specification where suspension allows

Alignment service is appropriate when symptoms appear or after an event that can change wheel angles. Schedule an inspection after major pothole impact or suspension work, especially if the truck no longer tracks straight. Measuring the angles confirms whether an adjustment is needed.

• Inspect after a major pothole impact
• Check alignment after suspension work
• Book service when steering or tire-wear symptoms develop

A 2016 Ram 2500 may need an alignment when it does not travel straight on a flat road or when the steering wheel is not centered while driving straight. Tire wear that is faster on one edge can also indicate incorrect wheel angles. Vibration at speed may have other causes, so inspection helps identify the next step.

• Vehicle pulls to one side
• Steering wheel sits off center
• Tire tread wears faster on one edge

The service begins with an inspection of the tires, steering, and suspension for wear that could hold the alignment out of specification. Current wheel angles are measured before any adjustment. The results help determine whether the truck needs alignment service or further diagnosis.

• Camber, caster, and toe measurement
• Inspection for tire, steering, and suspension wear
• Adjustment where the suspension allows

The alignment inspection includes steering and suspension components that may affect the wheel angles. If a component has excessive wear, adjustment alone may not correct the concern for long. The technician can identify the condition before an alignment is performed and explain whether further inspection is needed.

• Inspect tie rods and steering components
• Check ball joints and suspension condition
• Verify whether worn parts could change alignment angles

Alignment service is most useful after symptoms, a major pothole impact, or suspension work. Even tire wear and centered steering are helpful signs, but measuring camber, caster, and toe provides a clearer answer. Larry H. Miller Dodge Ram Peoria can identify whether adjustment is needed before charging for an adjustment.

• Consider service after a major impact
• Check after suspension work
• Measure angles before approving adjustment

Peoria drivers can bring the 2016 Ram 2500 in for current measurements before an adjustment is authorized. The alignment process checks all four wheels and evaluates the tires, steering, and suspension for wear that could affect the result. That makes the appointment useful even when the question is whether an alignment is needed at all.

Visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road in Peoria, Arizona, or call 623-400-7471 to discuss alignment symptoms and arrange an appointment. You can also schedule service online.

Before adjustment, the technician checks tire condition along with steering and suspension components. Worn parts can allow angles to change or prevent the alignment from holding. This is why a pulling concern or uneven tread wear should not be addressed by alignment adjustment alone without first checking the components that control wheel position.

The service uses the measured angles to guide any adjustment allowed by the suspension. A 2016 Ram 2500 with an off-center steering wheel, uneven tire wear, or a tendency to pull can be evaluated against its factory alignment references. Bring your 2016 Ram 2500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.