2016 Ram Promaster City Alignment: Specs & Service

Alignment service is generally worth considering every 2–3 years or 30,000 miles, after suspension work, or after a major pothole impact. Peoria drivers should also pay attention to changes in steering or tire wear rather than waiting for a calendar date.

• Consider service after a significant pothole impact.
• Have the angles checked after suspension repairs.
• Use tire wear and steering behavior as practical indicators.

A 2016 Ram Promaster City that does not track straight on a flat road may have camber, caster, or toe angles outside specification. Alignment service also includes an inspection of tires, steering, and suspension parts for wear that could affect the measurement.

• The vehicle pulls left or right while driving straight.
• The steering wheel sits off center on a level road.
• One edge of a tire wears faster than the other.

The technician checks the tire, steering, and suspension components before making adjustments. This inspection helps identify wear that could hold the alignment out of specification or prevent the vehicle from tracking correctly after service.

• Measurement of camber, caster, and toe on all four wheels.
• Adjustment toward manufacturer specification where possible.
• Inspection of tires, steering, and suspension components.

An alignment measurement begins with an inspection of the components that control wheel position. If a worn steering or suspension part is affecting the angles, the technician can identify the condition before adjustment and explain whether additional repair is needed.

• Steering and suspension components are checked for wear.
• Tire condition is inspected for uneven or accelerated wear.
• Alignment adjustment is performed where the suspension allows.

A measurement can still be useful after a major pothole impact, suspension work, or a noticeable change in steering behavior. The inspection provides current camber, caster, and toe measurements so you can determine whether an adjustment is needed before paying for one.

• Check for even tread wear before scheduling routine alignment service.
• Consider measurement after suspension component replacement.
• Book an inspection if the steering becomes off center.

This approach helps separate an alignment issue from tire, steering, or suspension wear. For a 2016 Ram Promaster City in Peoria, the service provides a focused way to investigate pulling, an off-center wheel, or uneven tread wear.

• Camber, caster, and toe are measured on all four wheels.
• Related tires, steering, and suspension parts are inspected.
• Adjustment is made where the suspension permits it.

The inspection also considers tire condition, steering components, and suspension parts. Wear in those areas can cause an alignment to move out of specification or make it difficult for the vehicle to hold an adjustment. For a front-wheel-drive 2016 Ram Promaster City, changes in front-end steering feel or uneven front-tire wear deserve attention, while all four wheels are measured during the alignment service.

Alignment concerns can appear as pulling on a flat road, an off-center steering wheel, or faster wear along one edge of a tire. Measuring first helps determine whether adjustment is appropriate. Bring your 2016 Ram Promaster City to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

The alignment process checks all four wheels and measures camber, caster, and toe. Where the suspension allows, the technician adjusts the angles toward the manufacturer's specification. Checking the related components first helps clarify whether an alignment adjustment is the appropriate next step for the vehicle.

Larry H. Miller Dodge Ram Peoria is located at 8665 West Bell Road, Peoria, AZ 85382. To discuss an alignment concern or arrange an inspection for your 2016 Ram Promaster City, call 623-400-7471 or schedule service online.