2018 Dodge Charger Alignment: Specs & Service

Alignment is generally considered after suspension work, a major pothole impact, or symptoms such as pulling and uneven tire wear. Measuring the current angles is more useful than automatically scheduling an alignment at every tire rotation. Larry H. Miller Dodge Ram Peoria can compare the readings with the factory specification.

• Consider an inspection after suspension or steering component replacement.
• Watch for edge wear on the tires.
• Schedule service after a significant road impact.

Wheels out of alignment can scrub the tires as the vehicle rolls, wearing the tread unevenly. A vibration at speed can also indicate a concern that deserves inspection, although it may involve more than alignment angles. Service at Larry H. Miller Dodge Ram Peoria includes inspection of the tires, steering, and suspension components that could affect alignment.

• Vehicle pulls on a flat road.
• Steering wheel is not centered while driving straight.
• One tire edge wears faster than the other.

The service begins with an inspection of tires, steering, and suspension components for wear that could hold an alignment out of specification. Current angles are measured against the factory specification so the technician can determine whether adjustment is needed. The service is available at Larry H. Miller Dodge Ram Peoria in Peoria, AZ.

• Camber, caster, and toe measurement.
• Adjustment where the suspension allows.
• Inspection for wear that may affect alignment.

A technician should inspect the suspension and steering components before treating the alignment angles as the only concern. If wear is found, Larry H. Miller Dodge Ram Peoria can explain what was observed and whether an adjustment alone is appropriate. This approach helps distinguish an alignment setting from a component condition that may change the readings again.

• Inspect tie rods for wear.
• Check ball joints and struts.
• Review tire condition and steering response.

It becomes more worthwhile after a major pothole impact, suspension work, or a change in tire wear or steering position. Measurement provides a direct comparison with the factory specification instead of relying only on how the vehicle feels. Larry H. Miller Dodge Ram Peoria can identify whether adjustment is needed before the service is performed.

• Check for even tread wear.
• Note whether the steering wheel remains centered.
• Measure the angles after an impact or repair.

Booking gives the technician an opportunity to measure camber, caster, and toe against the factory specification. The inspection also considers tire, steering, and suspension wear that could affect the result. Use the schedule service page to request an appointment.

• Service location: 8665 West Bell Road.
• City: Peoria, Arizona.
• Phone: 623-400-7471.

Suspension and steering inspection is important before adjustment. Worn tie rods, ball joints, or struts can prevent an alignment from holding, while tire wear can reveal how the vehicle has been tracking. Measuring the current angles helps determine whether the vehicle needs an adjustment or further inspection.

The 2018 Dodge Charger is a sedan offered across trims with 3.6- to 6.4-liter engines, 292 to 707 horsepower, and an 8-speed automatic transmission. Those specifications do not replace an alignment measurement; the wheel angles still need to be checked against the applicable factory specification. Bring your 2018 Dodge Charger to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Service measures camber, caster, and toe on all four wheels and adjusts the angles toward the manufacturer’s specification where the suspension allows. That process gives drivers current measurements before an adjustment is approved. It also helps identify whether worn steering or suspension components could cause the vehicle to move out of specification again.

For directions, appointment availability, or questions about alignment service, visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road, Peoria, AZ 85382. Call 623-400-7471 or use the service scheduler to request an appointment.