2018 Ram 2500 Alignment: Specs & Service

Alignment is also worth checking after suspension work, a major pothole impact, or any change in handling. A heavy-duty truck can show alignment concerns through tire wear or steering changes before the issue feels severe. Larry H. Miller Dodge Ram Peoria can measure the current angles against the factory specification.

• Check alignment after suspension component replacement.
• Inspect the truck after a significant pothole impact.
• Use tire wear and steering feel as practical warning signs.

On a flat road, the truck should not consistently drift left or right with the steering held straight. Look closely at the inner and outer edges of the tires because alignment-related wear can shorten tread life. Larry H. Miller Dodge Ram Peoria checks the tires, steering, and suspension for conditions that could keep the alignment out of specification.

• Vehicle pulls to one side on a flat road.
• Steering wheel is not centered while driving straight.
• One tire edge wears faster than the other.

The inspection also looks for tire, steering, and suspension wear that could prevent the angles from holding. Booking gives you current measurements against the factory specification, helping identify whether an adjustment is needed before you pay for one. This process is useful for a truck used for towing, hauling, or daily driving.

• Measure camber, caster, and toe on all four wheels.
• Inspect tires, steering, and suspension components.
• Adjust alignment where the suspension allows.

An alignment measurement alone cannot correct a component that has excessive wear or movement. The service inspection checks steering and suspension parts before adjustment, so the cause of the concern can be identified. Larry H. Miller Dodge Ram Peoria will explain what the inspection finds and whether an alignment adjustment is appropriate.

• Inspect tie rods for wear that can change toe.
• Check ball joints and struts for movement or damage.
• Confirm tires are not contributing to the concern.

A truck that tracks straight may not need an immediate adjustment, especially when tire wear is even and the steering wheel is centered. A measurement can still clarify the condition of the angles before an adjustment is recommended. Larry H. Miller Dodge Ram Peoria focuses the booking on current readings and inspection findings.

• Review tire wear before requesting an adjustment.
• Check the steering wheel position on a flat road.
• Measure alignment after suspension work or impact damage.

The service measures camber, caster, and toe on all four wheels and checks tires, steering, and suspension components for wear. The results show whether adjustment to the manufacturer's specification is needed. You can schedule service online before visiting the dealership.

• Location: 8665 West Bell Road, Peoria, AZ 85382.
• Service measures all four wheel alignment angles.
• Call 623-400-7471 for assistance.

Next, technicians measure camber, caster, and toe on all four wheels against the manufacturer's specification. Where the suspension allows adjustment, the angles are brought back toward that specification. The service is designed to identify whether correction is needed rather than automatically recommending an adjustment.

After the measurements and any permitted adjustment, the truck can be evaluated for the symptoms that prompted the visit, including pulling, an off-center steering wheel, or edge wear. Ask about current alignment warranty terms when booking, as the applicable terms depend on the service order. Schedule service or call 623-400-7471.

The 2018 Ram 2500 is offered with a V8 engine, automatic transmission, and Crew Cab or Mega Cab body styles across its trims. Its towing range is 9,790 to 17,570 pounds, making stable steering and even tire contact important for daily driving and load use. Larry H. Miller Dodge Ram Peoria checks for tire, steering, and suspension wear that could keep an alignment out of specification. Bring your 2018 Ram 2500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Larry H. Miller Dodge Ram Peoria serves drivers from the surrounding Peoria area at 8665 West Bell Road. The service team can inspect the 2018 Ram 2500 before recommending an adjustment, helping distinguish an alignment concern from worn steering or suspension parts. Current readings show whether the truck needs adjustment under the manufacturer's specification.

For directions or appointment help, call 623-400-7471. You can also schedule service online for the 2018 Ram 2500 alignment inspection.