2020 Ram 2500 Alignment: Specs & Service

The service begins with an inspection of the tires, steering, and suspension components that could prevent the alignment from holding. Current angles are compared with manufacturer specifications before any adjustment is recommended.

• Camber, caster, and toe measurement
• Adjustment where the suspension allows
• Inspection for tire, steering, and suspension wear

Misaligned wheels can scrub the tires as the 2020 Ram 2500 rolls, creating uneven tread wear. These symptoms can appear while driving on a flat road and should be checked before tire wear becomes more severe.

• Vehicle pulls to one side on a flat road
• Steering wheel is not centered while driving straight
• One edge of a tire wears faster than the other

Tie rods, ball joints, or other steering and suspension parts can affect alignment results. Larry H. Miller Dodge Ram Peoria inspects these areas before adjustment and explains whether component wear should be addressed first.

• Steering and suspension component inspection
• Review of tire wear that may indicate a cause
• Adjustment only where the suspension allows

Alignment service is especially useful when tire wear, steering position, or driving behavior changes. Measuring the current angles helps determine whether an adjustment is needed instead of assuming one is necessary.

• Current angles are compared with factory specifications
• Tires are checked for uneven wear
• Steering and suspension components are inspected

The 2020 Ram 2500 is available with Regular Cab and Crew Cab body styles, and either configuration can show alignment-related tire or steering symptoms. Measuring all four wheels helps identify the angles contributing to the concern.

• Reduces tire scrubbing caused by incorrect angles
• Checks steering position while driving straight
• Measures camber, caster, and toe on all four wheels

Booking provides current measurements against factory specifications so you can learn whether an adjustment is needed. Schedule your appointment online through the service scheduler before visiting the dealership.

• Service location: 8665 West Bell Road
• City: Peoria, Arizona
• Schedule service online

Next, technicians measure camber, caster, and toe on all four wheels. These angles affect how the tires contact the road and how the steering wheel sits during straight-line driving. Where the suspension allows, the angles are adjusted back to the manufacturer’s specification. The measurement process gives the driver a clear basis for deciding whether adjustment is needed.

Alignment service addresses symptoms such as pulling to one side, an off-center steering wheel, or tire wear concentrated on one edge. To begin with current measurements for your 2020 Ram 2500, schedule service with Larry H. Miller Dodge Ram Peoria at 623-400-7471.

The 2020 Ram 2500 uses a V8 engine layout and is offered in Regular Cab and Crew Cab body styles, but alignment concerns are identified through wheel-angle measurements and tire or steering symptoms rather than engine configuration. A vehicle that pulls on a flat road, has an off-center steering wheel, or develops one-edge tire wear should receive an inspection.

Current readings help separate an alignment adjustment from a component concern. Bring your 2020 Ram 2500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Larry H. Miller Dodge Ram Peoria serves drivers from its location at 8665 West Bell Road in Peoria, AZ. The alignment process includes measurement of camber, caster, and toe on all four wheels, along with inspection of tire, steering, and suspension components that may influence the result.

For directions or appointment assistance, contact Larry H. Miller Dodge Ram Peoria at 623-400-7471. You can also schedule service online for your 2020 Ram 2500.