2020 Ram 2500 Brake Specials: Specs & Service

These symptoms can involve pads, rotors, calipers, hoses, hardware, or fluid. A complete inspection helps identify the cause before a small wear concern affects other brake components. Larry H. Miller Dodge Ram Peoria can assess the system in Peoria.

• Listen for squealing, scraping, or grinding during braking.
• Pay attention to a pulsing or soft brake pedal.
• Schedule an inspection if a warning light appears or fluid looks dark.

Brakes wear as a system, so checking related components helps determine what the vehicle actually needs. The inspection is available at Larry H. Miller Dodge Ram Peoria on West Bell Road. You can also review service specials before booking.

• Pad-material measurement at all four corners.
• Rotor-thickness and runout measurement.
• Inspection of calipers, hoses, hardware, and brake fluid.

A technician measures the rotors and compares their condition with the applicable minimum specification before recommending parts. If the rotors remain within specification, pads may be appropriate; if they do not, pads and rotors may both be needed. This approach helps avoid replacing components that still meet requirements.

• Measure rotor thickness.
• Check rotor runout and visible condition.
• Match the recommendation to the complete brake inspection.

Brake symptoms can indicate wear or a condition affecting braking performance. Continuing to drive may allow related components to deteriorate, particularly when the truck is used for towing or heavy-duty work. Contact Larry H. Miller Dodge Ram Peoria to arrange an inspection.

• Do not ignore grinding or a soft pedal.
• Respond promptly to a brake warning light.
• Have pads, rotors, fluid, and related hardware evaluated together.

Regular inspection can identify pad wear, rotor concerns, fluid condition, and related component issues before symptoms become more noticeable. The schedule is especially useful for a truck that experiences towing, frequent stops, or demanding road conditions. Service is available in Peoria at Larry H. Miller Dodge Ram Peoria.

• Follow the 10,000-mile brake-system inspection interval.
• Arrange an assessment sooner when symptoms appear.
• Ask for the entire brake system to be evaluated together.

The 2020 Ram 2500 is offered with a 6.4-liter V8, 429 lb-ft of torque, and maximum towing across trims ranging from 10,580 to 17,350 pounds. Actual braking needs depend on use and conditions. Larry H. Miller Dodge Ram Peoria can check the system before demanding towing duty.

• Inspect the brake system before heavy towing use.
• Check rotor thickness and runout.
• Review pad material, hardware, and fluid condition.

Replacing one component while overlooking another can shorten the service life of the new part. A complete assessment at Larry H. Miller Dodge Ram Peoria measures the pads and rotors and checks the supporting components. The result is a recommendation based on observed condition.

• Measure pad material on all four corners.
• Measure rotor thickness and runout.
• Inspect fluid, calipers, hoses, and hardware.

Booking allows the full brake system to be assessed together, with current service specials applied to the work the vehicle actually needs. Use the schedule service page or review service specials before your visit.

• Located at 8665 West Bell Road, Peoria, AZ 85382.
• Brake inspection covers pads, rotors, fluid, and related hardware.
• Call 623-400-7471 for assistance.

Brake service begins with measuring pad material on all four corners. The inspection also measures rotor thickness and runout, then checks calipers, hoses, hardware, and brake fluid condition. These checks matter because pads, rotors, fluid, and supporting parts wear together. Squealing, scraping, grinding, a pulsing or soft pedal, a brake warning light, or dark fluid are reasons to arrange an assessment.

The 2020 Ram 2500 uses a 6.4-liter V8 with 429 lb-ft of torque, and towing across its trims ranges from 10,580 to 17,350 pounds. Towing and repeated braking can increase demand on the system. The manufacturer’s published maintenance schedule calls for brake-system inspection every 10,000 miles. Visit Larry H. Miller Dodge Ram Peoria in Peoria, call 623-400-7471, or use the schedule service page.

Rotor thickness and runout are measured to evaluate the rotor’s condition. Calipers, hoses, hardware, and brake fluid are inspected because a brake system can continue to have concerns after pad replacement if related components are overlooked. Squealing, scraping, grinding, pedal pulsation, a soft pedal, a warning light, or dark fluid should be mentioned when booking.

The assessment supports a recommendation based on the vehicle’s actual condition. Current service specials can be applied to the work the vehicle needs. Schedule a brake inspection through the schedule service page or call 623-400-7471 for Larry H. Miller Dodge Ram Peoria in Peoria, AZ.

Brake evaluation includes front and rear pad-material measurement on all four corners, plus rotor-thickness and runout measurements. The inspection also covers calipers, hoses, hardware, and brake fluid condition. These checks help determine whether the vehicle needs pad service, rotor service, or attention to another brake component.

Drivers should pay attention to squealing, scraping, grinding, a pulsing or soft pedal, a brake warning light, or dark fluid. The manufacturer’s published maintenance schedule calls for inspection of the brake system every 10,000 miles. Bring your 2020 Ram 2500 to Larry H. Miller Dodge Ram Peoria in Peoria for an OEM-spec brake service — schedule service.