2020 Ram 3500 Alignment: Specs & Service

An alignment is generally worth checking after suspension work, a major pothole impact, or when driving symptoms appear. At Larry H. Miller Dodge Ram Peoria, measuring the current angles helps determine whether adjustment is needed. This approach avoids paying for an adjustment when the truck is already within specification.

• Check after suspension or steering component replacement.
• Inspect after a significant pothole or curb impact.
• Measure if tire wear or steering changes appear.

These symptoms can occur when camber, caster, or toe moves outside the manufacturer's specification. A vibration at speed can also be a reason to have the tires, wheels, steering, and suspension inspected. Service at Larry H. Miller Dodge Ram Peoria begins with measuring the alignment angles.

• Pulling on a flat road.
• Steering wheel off center while driving straight.
• Uneven or one-edge tread wear.

The technician also checks tire condition, steering components, and suspension parts for wear that could prevent the alignment from holding. The service is designed to identify whether an adjustment is appropriate before work is performed. Booking gives you current angle measurements against the factory specification.

• Camber, caster, and toe measurement.
• Adjustment where the suspension allows.
• Inspection of tires, steering, and suspension.

That is why the tires, steering, and suspension are inspected before an adjustment. If a component is worn, the technician can explain how it affects the alignment and what should be addressed. This inspection helps separate an alignment issue from a part that needs repair.

• Inspect tie rods and other steering components.
• Check ball joints and suspension condition.
• Identify wear that could change alignment angles.

Visual driving impressions do not show every camber, caster, or toe difference. Measuring the angles provides a factual basis for deciding whether adjustment is needed. Larry H. Miller Dodge Ram Peoria can inspect the truck before an alignment is performed.

• Measure before paying for an adjustment.
• Check for uneven tread wear.
• Inspect after steering or suspension work.

The service measures all four wheel angles and checks the tires, steering, and suspension for conditions that can affect alignment. Booking lets the technician compare current measurements with the factory specification. Call 623-400-7471 or use the schedule service page.

• Address: 8665 West Bell Road, Peoria, AZ 85382.
• Phone: 623-400-7471.
• Online scheduling is available through the service department.

The technician then measures camber, caster, and toe on all four wheels. The readings show how the truck currently compares with its factory alignment specifications. Where the suspension allows adjustment, the angles are corrected toward those specifications. This process addresses the wheel-position changes that can cause tire scrub, uneven tread wear, pulling, or an off-center steering wheel.

After adjustment, the measured results can be reviewed against the initial readings. A road test helps confirm steering feel and tracking. The service is intended to establish whether an adjustment is needed before payment for one. Use the schedule service link or call 623-400-7471 to arrange an appointment at Larry H. Miller Dodge Ram Peoria.

Front and rear readings are evaluated independently against the applicable factory specifications. Adjustment is made where the suspension design allows it. If an angle cannot be brought into specification, the inspection can help identify whether a worn steering or suspension component is contributing to the condition. Common driver observations include pulling, an off-center wheel, uneven shoulder wear, or vibration at speed; those symptoms should be evaluated rather than automatically attributed to alignment.

Measurement before adjustment gives the driver a clear basis for deciding whether work is needed. Bring your 2020 Ram 3500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

The inspection begins with the vehicle's current condition. Technicians look at tire wear, steering components, and suspension parts that could hold an alignment out of specification. The four wheel angles are then measured so the customer can learn whether adjustment is needed before paying for one. This is especially useful for a heavy-duty truck that may experience changing loads and demanding road use.

Visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road, Peoria, AZ 85382, or call 623-400-7471. You can also schedule service online.