2021 Ram 1500 Alignment: Specs & Service

The manufacturer's maintenance schedule does not specify a fixed alignment interval for this model year. An alignment check is useful when driving symptoms or tire wear suggest the wheel angles have changed. Larry H. Miller Dodge Ram Peoria can measure the current angles against factory specifications before recommending an adjustment.

• Check alignment after suspension or steering component replacement.
• Schedule an inspection after a major pothole impact.
• Use tire wear and steering feel as practical warning signs.

Misaligned wheels can scrub the tires as the truck rolls, which may wear tread unevenly and affect straight-line steering. These symptoms can also relate to tire or suspension condition, so an inspection helps identify the cause. Service at Larry H. Miller Dodge Ram Peoria includes measurement of all four wheel angles.

• The truck pulls on a flat road.
• The steering wheel is not centered while driving straight.
• One tire edge wears faster than the other.

The service begins with an inspection of the tires, steering, and suspension components for wear that could prevent the alignment from holding. Current angles are compared with factory specifications before any adjustment is made. This approach helps determine whether the truck needs alignment correction or additional attention.

• Measurement of camber, caster, and toe.
• Inspection of tires, steering, and suspension components.
• Adjustment to factory specification where possible.

A technician should inspect the suspension and steering before adjusting the wheel angles. If a component has excessive wear, correcting alignment alone may not resolve pulling or uneven tire wear. Larry H. Miller Dodge Ram Peoria can explain the inspection findings and identify whether an adjustment is appropriate.

• Inspect tie rods for wear or looseness.
• Check ball joints and struts before alignment adjustment.
• Confirm the truck can hold factory alignment angles.

It becomes more worthwhile after steering or suspension component replacement, a major pothole impact, or the first signs of uneven tire wear. Measuring the angles provides a clear answer before an adjustment is recommended. The inspection can also identify tire or suspension conditions that may affect alignment results.

• Consider alignment after a significant road impact.
• Watch both tire edges for uneven tread wear.
• Pay attention to steering wheel position on straight roads.

This gives you a service-based answer about whether correction is needed. The inspection also looks for tire, steering, and suspension wear that could hold the wheels out of specification. To request service in Peoria, use the schedule service page or call Larry H. Miller Dodge Ram Peoria at 623-400-7471.

• Current wheel angles are measured first.
• Factory specifications guide any permitted adjustment.
• Steering and suspension condition is checked for related wear.

Before adjustment, the tires, steering components, and suspension are inspected for wear. Loose or worn parts can prevent an alignment from holding, while tire condition can contribute to steering concerns and uneven tread wear. If the suspension permits correction, the angles are adjusted to the manufacturer's specification.

This process is relevant to the 2021 Ram 1500 whether it is equipped with a V6 or V8 engine, because alignment depends on wheel position and suspension condition. If the truck pulls, the steering wheel is off center, or one tire edge wears quickly, bring your 2021 Ram 1500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Road impacts can change steering feel or wheel alignment, especially after a major pothole. An inspection also matters after steering or suspension work, when component position may have changed. The technician checks the tires, steering, and suspension before deciding whether an adjustment is appropriate.

To arrange service, visit the service scheduler or call 623-400-7471. Larry H. Miller Dodge Ram Peoria is located at 8665 West Bell Road, Peoria, AZ 85382, serving local Ram drivers with a direct inspection of current alignment angles and factory-spec adjustment where the suspension allows.