2024 Dodge Charger Alignment: Specs & Service

These symptoms can indicate that one or more wheel angles are outside the manufacturer's specification. On a flat road, the 2024 Dodge Charger should not continually drift to one side or require constant steering correction. Larry H. Miller Dodge Ram Peoria can measure all four wheels and inspect the related tires, steering, and suspension components.

• Pulling left or right on a flat road
• Steering wheel sitting off center while driving straight
• Tread wearing faster along one tire edge

The service checks the current angles against the manufacturer's specifications. Where the suspension allows, the technician adjusts the alignment back to specification. The inspection also considers tire condition and steering and suspension wear that could cause the angles to move out of specification again.

• Camber measurement on all four wheels
• Caster and toe measurement on all four wheels
• Inspection of tires, steering, and suspension components

Rather than treating alignment as an automatic scheduled service, watch for symptoms such as pulling, an off-center steering wheel, or one-sided tread wear. An alignment check can also be useful after a substantial impact or suspension-related repair. Measuring the current angles helps determine whether an adjustment is needed before you pay for one.

• Check alignment when steering no longer feels centered
• Inspect after a significant pothole or curb impact
• Review tire wear for uneven edge wear

An alignment inspection should include the components that influence wheel position. Larry H. Miller Dodge Ram Peoria checks the tires, steering, and suspension before recommending an adjustment. If wear is found, the technician can explain whether the component should be addressed before alignment measurements are finalized.

• Inspect tires for irregular tread wear
• Check steering components for wear
• Check suspension components that can affect alignment

If your 2024 Dodge Charger tracks straight and its tires are wearing evenly, an alignment may not be needed simply because time has passed. A measurement provides a direct look at the current wheel angles and can identify whether adjustment is necessary. That approach helps separate an alignment need from routine tire or service work.

• Consider symptoms before requesting adjustment
• Review tire wear across the tread
• Measure angles before paying for an adjustment

The service measures camber, caster, and toe on all four wheels and checks for tire, steering, or suspension wear. Booking lets the team measure the current angles against the factory specification so you can learn whether an adjustment is needed before paying for one. Contact the service department at 623-400-7471 or schedule service.

• Peoria service location: 8665 West Bell Road
• Vehicle: 2024 Dodge Charger sedan
• Fuel type: regular unleaded

Next, the technician measures camber, caster, and toe on all four wheels. The readings are compared with the manufacturer's specification for the vehicle. Where the suspension allows, the technician adjusts the applicable angles back to specification. The goal is to identify whether an adjustment is needed based on measured angles rather than assuming every vehicle requires one.

Alignment symptoms can include pulling to one side, an off-center steering wheel, or faster wear along one edge of a tire. These conditions can result when the wheels scrub the tires as the vehicle rolls. To have the angles checked, schedule service at Larry H. Miller Dodge Ram Peoria or call 623-400-7471.

The service also includes an inspection of tires, steering, and suspension components. Those checks are important because a worn component may hold the vehicle out of specification or allow an alignment to move after service. Uneven tire wear, steering pull, and an off-center wheel can help identify a concern, but measurement is needed to determine whether adjustment is required.

Because specific factory angle values are not stated here, the technician uses the applicable manufacturer specification during the measurement and adjustment process. This keeps the evaluation focused on the actual 2024 Dodge Charger rather than a generic setting. Bring your 2024 Dodge Charger to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Larry H. Miller Dodge Ram Peoria measures camber, caster, and toe on all four wheels and checks the components that can affect the result. The booking gives you a current comparison against the manufacturer's specification, helping determine whether an adjustment is needed before you pay for one. The 2024 Dodge Charger is a sedan offered in one trim and uses regular unleaded fuel.

Visit the service department at 8665 West Bell Road, Peoria, AZ 85382. For assistance with an alignment inspection, call 623-400-7471 or schedule service online.