2024 Dodge Durango Alignment: Specs & Service

These symptoms can indicate that the wheels are not tracking correctly on your 2024 Dodge Durango. Larry H. Miller Dodge Ram Peoria can inspect the tires, steering, and suspension before measuring the alignment angles. Identifying the cause early may help prevent additional tread wear.

• Vehicle pulls on a flat road
• Steering wheel is not centered while driving straight
• One tire edge wears faster than the other

The service begins with an inspection of tires, steering, suspension, and components that could prevent the alignment from holding. The technician compares current angles with factory specifications and explains whether adjustment is needed. Booking service at Larry H. Miller Dodge Ram Peoria gets the current angles measured before you pay for an adjustment.

• Camber, caster, and toe measurement
• Adjustment where the suspension allows
• Inspection for wear that can affect alignment

An alignment is not automatically required at every tire rotation if the vehicle tracks straight and the tires wear evenly. Have the angles checked after suspension component replacement or a significant road impact. Larry H. Miller Dodge Ram Peoria measures the current alignment against factory specifications before recommending adjustment.

• Check after a major pothole impact
• Check after suspension work
• Check when tire wear or steering symptoms appear

An alignment corrects wheel angles only when the related components are in suitable condition. A technician at Larry H. Miller Dodge Ram Peoria checks the steering and suspension for wear that could cause the vehicle to pull again. If another repair is needed, the inspection helps identify the reason and what should be addressed.

• Inspect tie rods for wear
• Check ball joints and struts
• Review tire and steering condition

Wheel angles can change after a significant impact or suspension work even when the first symptom is subtle. A measurement shows whether the current camber, caster, and toe remain within factory specifications. The inspection at Larry H. Miller Dodge Ram Peoria helps distinguish a needed adjustment from a vehicle that does not require one.

• Measure before deciding on adjustment
• Check for even tire wear
• Review alignment after component replacement

The appointment gives the service team an opportunity to measure the four wheel angles and inspect tires, steering, and suspension components. The 2024 Dodge Durango alignment process is based on factory specifications, with adjustment performed where the suspension allows. You can also review current service specials before scheduling.

• Use the online service scheduler
• Request an alignment inspection
• Ask about current service specials

Next, the technician measures camber, caster, and toe at all four wheels and compares the readings with the manufacturer's factory specifications. Where the suspension allows, the angles are adjusted to specification. Before-and-after readings document the measured condition and the result of the adjustment, while a road test helps confirm steering behavior after service.

The alignment inspection is useful even when the cause is not obvious because it separates an angle correction from a worn-component concern. If tie rods, ball joints, struts, or another suspension part prevents the alignment from holding, the inspection helps identify that issue before adjustment. Schedule service at Larry H. Miller Dodge Ram Peoria or call 623-400-7471.

OEM alignment equipment is used to capture the current angles and compare them with the vehicle's factory specifications. Caster affects steering behavior and return, camber describes wheel tilt, and toe describes how the wheels point relative to one another. Adjustments are made back to specification where the suspension allows, followed by before-and-after readings and a road test.

This process matters for a rear-wheel-drive SUV because incorrect angles can scrub the tires as the vehicle rolls, create an off-center steering wheel, or cause the vehicle to pull. Bring your 2024 Dodge Durango to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

The service is designed for local driving conditions and the impacts that can disturb wheel angles, including potholes, road construction, and uneven pavement. After an inspection of tires, steering, and suspension components, the technician measures camber, caster, and toe on all four wheels against factory specifications. Adjustments are completed where the suspension allows, with before-and-after readings and a road test.

For directions or appointment help, visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road, Peoria, AZ 85382, or call 623-400-7471. You can also schedule service online.