2024 Ram 2500 Alignment: Specs & Service

Alignment service is generally considered after a major pothole impact, suspension work, or signs that the wheels are no longer tracking correctly. An inspection can help determine whether the angles remain within the manufacturer's specification. Larry H. Miller Dodge Ram Peoria can measure the current angles before an adjustment is recommended.

• Consider an inspection after suspension component replacement.
• Watch for uneven tread wear across the tires.
• Check alignment after a significant road impact.

These symptoms can indicate that camber, caster, or toe has moved outside the manufacturer's specification. The 2024 Ram 2500 is a full-size Crew Cab pickup with a 140.5-inch wheelbase, so a proper measurement helps identify whether adjustment is needed. Vibration at speed can also justify an inspection, although other tire or wheel concerns may cause it.

• Vehicle pulls on a flat road.
• Steering wheel is not centered while driving straight.
• Tread wears unevenly from one edge to the other.

The service also includes inspection of the tires, steering, and suspension components for wear that could prevent the alignment from holding. Measuring before adjustment helps identify the current condition of the truck. The goal is to correct wheel angles that are contributing to tire scrubbing, uneven wear, or an off-center steering feel.

• Camber, caster, and toe measurement.
• Adjustment toward manufacturer specifications where possible.
• Inspection for worn tires, steering, or suspension components.

Loose or worn components may affect the measured angles and can cause symptoms to return after service. The inspection looks for tire, steering, and suspension wear that may be contributing to the concern. Larry H. Miller Dodge Ram Peoria can explain what was found and whether an alignment adjustment is appropriate.

• Steering components should be checked for wear.
• Suspension components should be inspected before adjustment.
• Tires should be evaluated for uneven tread wear.

A straight-tracking truck may not require an adjustment at every tire service. Measuring the current angles can show whether they remain within the manufacturer's specification before payment for an adjustment. This approach is especially useful when tire wear or steering feel has changed without an obvious pulling sensation.

• Measure after a major pothole impact.
• Check alignment after suspension work.
• Inspect tires for early edge wear.

This gives you information about whether the wheel angles need correction rather than assuming an adjustment is necessary. The service also includes inspection of the tires, steering, and suspension for wear that could hold the alignment out of specification. Schedule service with Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road.

• Current angles are measured on all four wheels.
• Measurements are compared with manufacturer specifications.
• Inspection helps identify wear that may affect alignment.

The technician then measures camber, caster, and toe on all four wheels. These angles describe how the wheels contact the road and how the truck responds to steering input. Where the suspension allows, the angles are adjusted back toward the manufacturer's specification. The purpose is not simply to center the steering wheel; it is to correct the wheel geometry contributing to pulling or uneven tread wear.

Booking first provides current angle measurements against factory specifications, so you can learn whether an adjustment is needed before paying for one. To request an appointment, schedule service or call 623-400-7471.

The truck's rear-wheel-drive layout, 140.5-inch wheelbase, and Crew Cab body make consistent wheel tracking important for predictable movement on the road. A pull, off-center steering wheel, or one-sided tread wear can indicate that measurement is warranted. The inspection also looks for tire, steering, and suspension wear that may prevent the alignment from remaining within specification.

Because exact alignment targets depend on the vehicle's factory reference and the measured condition of each wheel, the technician uses the applicable manufacturer specifications during the service. This keeps the recommendation tied to the truck's actual readings. Bring your 2024 Ram 2500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Larry H. Miller Dodge Ram Peoria provides alignment service at 8665 West Bell Road in Peoria, AZ. The inspection covers camber, caster, and toe on all four wheels, along with the tires, steering, and suspension components that can affect the result. The current readings are compared with the manufacturer's specification before an adjustment is recommended.

If your truck has developed uneven tire wear, changed steering feel, or a pull after a road impact, schedule service online. You can also contact Larry H. Miller Dodge Ram Peoria at 623-400-7471 for assistance.