2024 Ram 2500 Oil Filter: Specs & Service

The 2024 Ram 2500 is a heavy-duty Crew Cab pickup with a 6.4 L V8 engine, and an oil filter service helps keep the oil circulating through that engine as intended. Larry H. Miller Dodge Ram Peoria in Peoria, AZ, replaces the filter with one matched to the engine’s specification, renews the drain plug gasket or washer where the engine uses one, and checks for leaks after the engine runs. The filter captures debris carried by the oil; when it becomes loaded, the bypass valve opens and unfiltered oil circulates. Booking an oil and filter service gives this 410-horsepower Ram 2500 a fresh filter alongside its oil, with the work handled by the service team at 8665 West Bell Road.

What an oil filter replacement on a 2024 Ram 2500 involves

An oil filter replacement on the 2024 Ram 2500 begins with fitting a filter matched to the specification of the engine actually installed in the vehicle. Using the correctly matched filter supports proper filtration for the 6.4 L V8 rather than relying on a one-size-fits-all component. During the oil service, the drain plug gasket or washer is also replaced where this engine uses one, helping renew the sealing surface at the drain point.

After the filter and oil service are completed, the engine is run and the filter seal is checked for leaks. This final check matters because a seal that does not seat correctly can allow oil to escape after the vehicle leaves the service area. The work addresses the filter, its sealing components, and the post-service leak check in one visit. No maintenance interval is stated for this model year, so service timing should be guided by the manufacturer’s schedule and the vehicle’s service history. To have the filter matched to this engine and replaced alongside the oil, schedule service at Larry H. Miller Dodge Ram Peoria.

Why the filter matters on a 2024 Ram 2500

The 2024 Ram 2500 uses a 6.4 L, 6,417 cc V8 engine. As oil moves through that engine, it carries away particles and other debris created during operation. The oil filter’s job is to hold that debris so the oil reaching engine components remains filtered. The filter is a working part of the lubrication system, not merely an accessory replaced for convenience.

As debris accumulates, the filter can load up. Once it loads, the bypass valve opens so the engine continues receiving oil, but that oil circulates unfiltered. A loaded filter does not stop the engine getting oil; it stops the engine getting filtered oil, and that is worse in a quiet way. That is why the filter is replaced with the oil rather than stretched across two oil changes. A fresh filter restores the filtration step when the oil is renewed, helping the 429 lb-ft engine receive oil through a clean filtering element.

Oil and filter service at Larry H. Miller Dodge Ram Peoria

Larry H. Miller Dodge Ram Peoria provides oil and filter service for the 2024 Ram 2500 at its Peoria, Arizona location. The service is centered on the engine actually fitted to the truck: the replacement filter is matched to that engine, the drain plug gasket or washer is renewed where applicable, and the filter seal is checked after the engine has run. This approach keeps the work tied to specific service steps instead of treating every pickup as though its filtration needs were identical.

For this 6.4 L V8 Ram 2500, booking the service includes filter replacement alongside the oil. Drivers can schedule an appointment online or review service specials before visiting. Larry H. Miller Dodge Ram Peoria is located at 8665 West Bell Road, Peoria, AZ 85382. Call (623) 400-7471 to discuss the oil filter service or arrange a visit.