2025 Dodge Hornet Alignment: Specs & Service

An alignment check is still appropriate when the vehicle pulls on a flat road, the steering wheel is off center, or tire tread wears unevenly. It can also be useful after suspension work or a significant pothole impact. Larry H. Miller Dodge Ram Peoria can measure the current angles before recommending an adjustment.

• Check alignment when steering behavior changes.
• Inspect after major road impacts or suspension repairs.
• Measure the angles before paying for an adjustment.

These symptoms can indicate that one or more wheel angles have moved outside the manufacturer's specification. An alignment measurement helps identify whether camber, caster, or toe is contributing to the concern. The inspection also looks for tire, steering, and suspension wear that could affect alignment results.

• Vehicle pulls on a flat road.
• Steering wheel sits off center while driving straight.
• Tread wears unevenly across a tire.

The service begins with an inspection of the tires, steering, and suspension components for wear that could hold an alignment out of specification. The current angles are measured against the factory specification before any adjustment is recommended. This process helps show whether the vehicle needs alignment work.

• Camber, caster, and toe measurement.
• Adjustment to manufacturer's specification where allowed.
• Inspection for tire, steering, and suspension wear.

That is why the inspection should take place before adjustment. If a steering or suspension component has excessive wear, changing wheel angles alone may not correct the concern for long. Larry H. Miller Dodge Ram Peoria can identify conditions that affect alignment and explain whether additional repair should come first.

• Inspect tie rods for wear.
• Check ball joints and struts.
• Explain findings before recommending additional work.

Alignment service becomes more relevant after a major pothole impact, suspension work, or a change in steering feel. A measurement can confirm the current angles before an adjustment is performed. This approach helps separate a needed alignment from a service that the vehicle may not require.

• Consider measurement after a strong road impact.
• Watch for uneven tread wear.
• Check steering position on a straight, flat road.

This gives drivers a clearer answer about whether the wheels are aligned correctly and whether the suspension allows adjustment. The service also includes inspection of tires, steering, and suspension components for wear that could affect the result. Visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road in Peoria, AZ.

• Measure all four wheel angles.
• Compare readings with factory specifications.
• Identify wear that may affect alignment.

Where the suspension allows adjustment, the angles are corrected to specification. The service is focused on identifying the vehicle's current condition before an adjustment is recommended, so the driver can learn whether alignment work is needed. Because uneven angles can scrub tire tread as the vehicle rolls, accurate measurement supports more even tire contact and centered steering. Contact Larry H. Miller Dodge Ram Peoria for current service details, then schedule service at 623-400-7471.

Drivers may first notice a pull on a flat road, an off-center steering wheel, or faster tread wear along one edge. The 2025 Dodge Hornet uses all-wheel drive across its four trims, so checking all four wheel positions provides a complete view of the vehicle's alignment condition. Bring your 2025 Dodge Hornet to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Before adjustment, the technician measures the current angles and checks the tires, steering, and suspension for conditions that could affect the result. This gives the driver a fact-based explanation of whether adjustment is needed. For directions or appointment assistance, call 623-400-7471 or visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road, Peoria, AZ 85382. You can also schedule service online.