2025 Ram 2500 Alignment: Specs & Service

Wheels that are out of alignment can scrub the tires as the 2025 Ram 2500 rolls, wearing the tread faster on one edge. A steering wheel that is not centered while driving straight is another useful warning sign. Larry H. Miller Dodge Ram Peoria can measure all four wheel angles and inspect related components.

• Vehicle pulls to one side on a flat road
• Steering wheel sits off center while traveling straight
• One edge of a tire wears faster than the other

The service begins with an inspection of the tires, steering, and suspension for wear that could hold the alignment out of specification. Where the suspension allows, the angles are adjusted back to the manufacturer's specification. Booking service gives you current measurements against the factory specification before an adjustment is made.

• Camber, caster, and toe measurement
• Inspection of tires, steering, and suspension components
• Adjustment to the manufacturer's specification where possible

An alignment check is useful when the truck begins pulling, the steering wheel becomes off center, or the tires show uneven edge wear. It is also sensible after suspension work or a major pothole impact. Larry H. Miller Dodge Ram Peoria can measure the current angles against the factory specification before recommending an adjustment.

• Check after a major pothole impact
• Check after suspension work
• Check when handling or tire wear changes

The inspection looks for tire, steering, and suspension wear before adjustment. Components that are worn may need attention because changing wheel angles alone may not correct the underlying condition. The service team can identify whether the truck needs an alignment adjustment or further inspection before work proceeds.

• Inspect tires for uneven tread wear
• Inspect steering components for wear
• Inspect suspension components that may affect alignment

A 2025 Ram 2500 that tracks straight may not need an adjustment at every tire service. Uneven tread wear can still indicate that the wheel angles need to be measured. Booking an inspection at Larry H. Miller Dodge Ram Peoria lets you learn whether an adjustment is needed before paying for one.

• Review tire wear before requesting adjustment
• Measure all four wheel angles
• Adjust only where the suspension allows

The service measures camber, caster, and toe on all four wheels and compares the readings with the manufacturer's specification. Technicians also inspect the tires, steering, and suspension for wear that could affect the result. This measurement-first approach helps determine whether an adjustment is needed.

• Location: 8665 West Bell Road, Peoria, AZ 85382
• Service: four-wheel camber, caster, and toe measurement
• Phone: 623-400-7471

Next, the service measures camber, caster, and toe on all four wheels. These three angles describe how each wheel sits and tracks in relation to the vehicle. Where the suspension allows, the angles are adjusted back to the manufacturer's specification. Booking the service provides current measurements against the factory specification before an adjustment is recommended.

The completed work addresses the measured angles rather than assuming every vehicle needs the same correction. A final review helps confirm the condition of the 2025 Ram 2500 after service. To arrange an appointment, schedule service with Larry H. Miller Dodge Ram Peoria or call 623-400-7471.

Before adjustment, the technician checks tires, steering, and suspension components for wear. A worn part can cause an alignment to move out of specification again, so inspection is an important part of the process. Where the suspension allows adjustment, the measured angles are brought back to the manufacturer's specification.

The 2025 Ram 2500 is offered across eight trims with rear-wheel-drive and four-wheel-drive configurations, so the appropriate factory reference depends on the vehicle configuration. The service focuses on the specifications that apply to the truck being inspected. Bring your 2025 Ram 2500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

The service is designed for the 2025 Ram 2500 and covers camber, caster, and toe measurement on all four wheels. The technician inspects the components that could hold an alignment out of specification and adjusts the angles back to the manufacturer's specification where the suspension allows. You can book the measurement before deciding whether adjustment is necessary.

For local assistance, visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road, Peoria, AZ 85382. To arrange an appointment or ask about alignment service for your truck, call 623-400-7471 or schedule service online.