2025 Ram 3500 Alignment: Specs & Service

An alignment check is appropriate when the truck develops symptoms or after an impact that may change wheel angles. Larry H. Miller Dodge Ram Peoria measures the current settings against factory specifications before recommending an adjustment.

• Check alignment after a major pothole impact.
• Consider an inspection after suspension work.
• Use tire wear and steering behavior as practical warning signs.

These symptoms can occur when wheel angles are outside the manufacturer's specifications. An alignment inspection at Larry H. Miller Dodge Ram Peoria measures camber, caster, and toe on all four wheels before adjustment.

• Vehicle pulls to one side on a flat road.
• Steering wheel sits off center while driving straight.
• One edge of a tire wears faster than the other.

The service also includes inspection of the tires, steering, and suspension components for wear that could prevent the alignment from holding. Booking first measures the current angles, so you can learn whether an adjustment is needed before paying for one.

• Camber, caster, and toe measurement.
• Adjustment to factory specification where possible.
• Inspection for tire, steering, and suspension wear.

Worn tires, steering parts, or suspension components can contribute to uneven wear and cause an alignment to move out of specification. Larry H. Miller Dodge Ram Peoria inspects these areas before recommending an adjustment.

• Inspect tires for uneven tread wear.
• Check steering components for wear.
• Check suspension components that may affect alignment.

A truck that tracks straight may not need an adjustment at every tire service. Measuring the wheel angles can still identify an alignment condition before it causes visible tread wear or changes steering behavior.

• Look for wear concentrated on one tire edge.
• Notice whether the steering wheel remains centered.
• Book an inspection after a significant road impact.

This approach helps determine whether the truck needs an adjustment before you pay for one. The inspection also looks for tire, steering, and suspension wear that could contribute to an alignment concern.

• Measure all four wheel angles.
• Compare measurements with manufacturer specifications.
• Identify wear that may affect alignment results.

Technicians then measure camber, caster, and toe on all four wheels. Where the suspension allows, the angles are adjusted back to the manufacturer's specification. The goal is to address the wheel geometry responsible for tire scrubbing, pulling, or an off-center steering wheel.

Booking service gives you current angle measurements against factory specifications before an adjustment is recommended. To schedule service at Larry H. Miller Dodge Ram Peoria, call 623-400-7471.

The inspection also considers tires, steering, and suspension components. Wear in these areas can hold an alignment out of specification or cause symptoms to return after adjustment. Measuring first helps separate an alignment concern from a component condition that needs attention.

For the 2025 Ram 3500, alignment service is especially relevant when uneven tire wear, pulling on a flat road, or an off-center steering wheel appears. Bring your 2025 Ram 3500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

The service measures camber, caster, and toe on all four wheels, checks tires and steering and suspension components, and adjusts the angles to the manufacturer's specification where the suspension allows. That process shows whether an adjustment is needed before you pay for one.

For directions or appointment assistance, visit 8665 West Bell Road in Peoria or call 623-400-7471. You can also schedule service online with Larry H. Miller Dodge Ram Peoria.