2026 Ram 1500 Alignment: Specs & Service

An alignment is generally worth checking after suspension work, a major pothole impact, or when handling and tire wear change. An inspection can determine whether the wheel angles remain within factory specifications before an adjustment is performed.

• Check alignment after suspension component replacement.
• Schedule an inspection after a significant pothole impact.
• Watch for pulling, off-center steering, or uneven tread wear.

Wheels that are out of alignment can scrub the tires as the truck rolls, wearing one edge of the tread faster than the other. Drivers may also notice vibration at speed or a steering wheel that does not sit straight while traveling on a flat road.

• Vehicle pulls left or right on a flat road.
• Steering wheel sits off center while driving straight.
• One edge of a tire wears faster than the other.

The service begins with an inspection of the tires, steering, and suspension components for wear that could hold the alignment out of specification. Measuring the current angles helps identify whether an adjustment is needed before work is performed.

• Camber, caster, and toe measurement on all four wheels.
• Adjustment toward manufacturer specifications where possible.
• Inspection of tires, steering, and suspension components.

A technician should inspect the suspension and steering before adjusting wheel angles. If a component has excessive wear, the alignment may not remain within specification until the underlying concern is addressed. The inspection helps identify whether adjustment is appropriate.

• Inspect tie rods for wear that can affect toe.
• Check ball joints and struts before alignment adjustment.
• Explain whether an alignment or additional repair is needed.

An inspection becomes more useful after a major pothole impact, suspension work, or a change in steering feel. Measuring the current angles can show whether an adjustment is needed before you pay for one.

• Consider inspection after suspension component replacement.
• Look for uneven tire wear even if the truck tracks straight.
• Use measured wheel angles to guide the service decision.

The service measures camber, caster, and toe on all four wheels and checks tires, steering, and suspension components. Booking first lets the technician measure the current angles against factory specifications and determine whether adjustment is needed.

• Service location: 8665 West Bell Road, Peoria, AZ 85382.
• Alignment inspection covers all four wheels.
• Call 623-400-7471 to discuss service.

Suspension and steering components are inspected before adjustment. Worn tie rods, ball joints, or struts can prevent the alignment from holding, so a component concern should be identified before relying on adjusted angles. Tire wear is also reviewed because scrubbing from an out-of-alignment wheel can wear one edge of the tread faster than the other.

Bring your 2026 Ram 1500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Larry H. Miller Dodge Ram Peoria is located at 8665 West Bell Road, Peoria, Arizona 85382. The service team checks the tires, steering, and suspension before measuring camber, caster, and toe on all four wheels. Where the suspension allows, the angles are adjusted to the manufacturer's specifications.

Call 623-400-7471 or visit the dealership at 8665 West Bell Road to discuss alignment service for your 2026 Ram 1500. You can also schedule service online.