2026 Ram 1500 Ramcharger Alignment: Specs & Service

An alignment is generally considered after symptoms develop, following suspension work, or after a major pothole impact. The service begins by measuring the current angles against factory specifications, so you can learn whether an adjustment is needed before paying for one.

• Consider an inspection after a major pothole impact.
• Alignment may be appropriate after suspension work.
• Uneven wear or pulling can signal a need for measurement.

These symptoms can occur when the wheels scrub the tires as the vehicle rolls. Larry H. Miller Dodge Ram Peoria measures all four wheels and checks related steering and suspension components before recommending an adjustment.

• The vehicle pulls on a flat road.
• The steering wheel sits off center while driving straight.
• Tread wears unevenly from one edge to the other.

The inspection also covers tires, steering, and suspension components for wear that could hold the alignment out of specification. Measuring first helps identify whether the vehicle needs an adjustment or further attention.

• Camber measurement on all four wheels.
• Caster and toe measurement on all four wheels.
• Inspection for tire, steering, and suspension wear.

This approach helps you learn whether an adjustment is needed before paying for one. It also gives the technician an opportunity to identify tire, steering, or suspension wear that may affect alignment results.

• Measurements cover all four wheels.
• Results are compared with manufacturer specifications.
• Related component wear is inspected.

Correct wheel angles help reduce the tire scrubbing that causes uneven tread wear. Alignment service can also address pulling and an off-center steering wheel when those symptoms result from alignment angles.

• Measures wheel angles on all four wheels.
• Adjusts angles where the suspension allows.
• Helps address uneven tire wear and pulling.

Alignment service is especially relevant when you notice uneven tire wear, an off-center steering wheel, or pulling on a flat road. Measuring first helps avoid paying for an adjustment that the vehicle does not need.

• Check for wear on one tire edge.
• Notice whether the steering wheel is centered.
• Book measurement after a major pothole impact.

Where the suspension allows, the technician adjusts the measured angles back to specification. This process addresses the geometry that can cause a vehicle to pull, leave the steering wheel off center, or scrub tread unevenly. Booking gives you current measurements against the factory specification before an adjustment is recommended, helping clarify the vehicle’s actual need.

Schedule service at Larry H. Miller Dodge Ram Peoria in Peoria, Arizona, or review service specials before visiting. Call 623-400-7471.

The service measures camber, caster, and toe on all four wheels and checks tires, steering, and suspension components for wear. Adjustments are made back to manufacturer specifications where the suspension allows. The result is a clear measurement of the vehicle’s current angles before an adjustment is recommended.

Schedule service at Larry H. Miller Dodge Ram Peoria, or call 623-400-7471 for assistance.

The service also includes inspection of the tires, steering, and suspension components. This matters because worn components can hold an alignment out of specification or make the condition return. A measurement-first approach helps distinguish a vehicle that needs an adjustment from one that needs attention to related wear before alignment work can be effective.

Symptoms to discuss include pulling to one side on a flat road, an off-center steering wheel while driving straight, and tread wearing faster on one edge. Bring your 2026 Ram 1500 Ramcharger to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.