2026 Ram 3500 Brake Specials: Specs & Service

The inspection measures remaining pad material on all four corners and checks rotor thickness and runout. Technicians also inspect calipers, hoses, hardware, and brake fluid. This system-wide review helps identify related wear instead of evaluating one component in isolation.

• Pad material measurement on all four corners
• Rotor thickness and runout measurement
• Caliper, hose, hardware, and brake fluid inspection

These symptoms can point to wear involving pads, rotors, hydraulics, or other brake components. A heavy-duty pickup such as the 2026 Ram 3500 may place additional demands on its brakes during towing or loaded driving. A complete inspection in Peoria can help identify the source.

• Squealing, scraping, or grinding during braking
• Pulsing or a soft brake pedal
• Brake warning light or dark brake fluid

If the rotors are within specification, replacing pads alone may be appropriate. If rotor measurements show excessive wear or runout, pads and rotors may need to be serviced together. Larry H. Miller Dodge Ram Peoria measures the brake system before recommending the repair.

• Pad material is measured before service recommendations
• Rotor thickness and runout are evaluated
• Recommendations are based on measured component condition

Continuing to drive with brake symptoms can allow wear to affect pads, rotors, fluid, hardware, or related components. Scraping and grinding should not be treated as normal operating sounds. Arrange an inspection in Peoria before relying on the truck for towing or heavy-duty work.

• Do not ignore grinding or scraping
• Have a soft or pulsing pedal evaluated
• Address a brake warning light promptly

Replacing one worn component while overlooking another can shorten the service life of the new part. The brake inspection for the 2026 Ram 3500 checks the friction material, rotors, calipers, hoses, hardware, and fluid condition together. That approach gives the technician a fuller view of the system.

• Pads and rotors are assessed together
• Calipers, hoses, and hardware are inspected
• Brake fluid condition is reviewed

The service evaluates all four corners, rotor measurements, calipers, hoses, hardware, and brake fluid condition. Booking lets the team assess the entire system and apply the current service special to the maintenance the 2026 Ram 3500 actually needs. Visit the service department at 8665 West Bell Road.

• Brake inspection covers all four corners
• Rotor thickness and runout are measured
• Current specials apply to qualifying needed work

Towing and loaded driving place additional demands on the brake system, making condition checks important before demanding use. The inspection measures pad material and rotor condition while also reviewing calipers, hoses, hardware, and brake fluid. The truck uses rear-wheel drive or four-wheel drive depending on configuration.

• Maximum towing ranges from 18,200 to 34,590 pounds
• Pad material is measured on all four corners
• Rotor thickness and runout are checked

The Brake Specials service examines the complete brake system rather than focusing only on one symptom. It covers pad measurements, rotor measurements, calipers, hoses, hardware, and brake fluid condition. Schedule service for a 2026 Ram 3500 through the dealership’s service department.

• Location: 8665 West Bell Road, Peoria, AZ 85382
• Dealer: Larry H. Miller Dodge Ram Peoria
• Phone: 623-400-7471

Brakes wear as a system. Pads, rotors, and fluid can deteriorate together, so replacing one part while overlooking another may shorten the life of new components. Squealing, scraping, grinding, a pulsing or soft pedal, a brake warning light, or dark-looking fluid are reasons to arrange an inspection. Current specials are applied to the work the vehicle actually needs.

Visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road, Peoria, AZ 85382, or call 623-400-7471 to discuss brake service for your 2026 Ram 3500.

Technicians inspect the calipers, hoses, and brake hardware, then review brake fluid condition. This matters because pads, rotors, and fluid degrade together. A complete evaluation can identify related concerns before a single-part repair leaves another worn component in service.

• Pad material measurement on all four corners
• Rotor thickness and runout measurement
• Caliper, hose, and hardware inspection
• Brake fluid condition check
• Brake Specials applied to needed service

For a brake inspection at Larry H. Miller Dodge Ram Peoria, schedule service or call 623-400-7471.

Brake service should be based on measured component condition. Pad material is checked on all four corners, while rotor thickness and runout are measured before recommendations are made. Calipers, hoses, hardware, and brake fluid are also inspected because brake wear affects the system as a whole.

Bring your 2026 Ram 3500 to Larry H. Miller Dodge Ram Peoria in Peoria for an OEM-spec brake service — schedule service.