2027 Ram 2500 Alignment: Specs & Service

These are general service intervals rather than a manufacturer maintenance interval for this model year. An alignment check is also sensible when the truck begins pulling or the steering wheel no longer sits straight. Larry H. Miller Dodge Ram Peoria can measure the current angles against factory specifications before recommending an adjustment.

• Check after a major pothole impact.
• Check after suspension component replacement.
• Inspect sooner if tire wear becomes uneven.

Wheels that are out of alignment can scrub the tires as the truck rolls, accelerating wear on one edge of the tread. A flat-road test can reveal a pull, while a steering wheel that sits off center may indicate altered toe or other alignment angles. Bring the truck to Larry H. Miller Dodge Ram Peoria in Peoria for measurement and inspection.

• Vehicle pulls on a flat road.
• Steering wheel is off center while driving straight.
• One tire edge wears faster than the other.

The service includes an inspection of the tires, steering, and suspension components that could prevent the angles from staying within specification. Current measurements are compared with the factory specification so you can learn whether an adjustment is needed before paying for one. This approach helps identify wear that may affect alignment results.

• Camber, caster, and toe measurement.
• Adjustment where the suspension allows.
• Inspection of tires, steering, and suspension components.

A suspension inspection should come before adjustment when a truck pulls, wears tires unevenly, or develops an off-center steering wheel. If a component has excessive wear, correcting alignment angles alone may not resolve the concern for long. The service team at Larry H. Miller Dodge Ram Peoria can explain what the inspection finds before additional work is recommended.

• Inspect tie rods for wear.
• Check ball joints and struts.
• Confirm the suspension can hold the specified angles.

It becomes more worthwhile after alignment symptoms, a major pothole impact, or replacement of a suspension component. Measuring the current angles gives you a fact-based answer instead of assuming an adjustment is necessary. That inspection can help protect even tire wear on a 2027 Ram 2500.

• Look for even tread wear.
• Watch for steering that pulls or sits off center.
• Consider measurement after suspension work.

The service measures camber, caster, and toe on all four wheels and checks tires, steering, and suspension components for wear. You receive current angle information compared with the manufacturer's specification, helping determine whether adjustment is needed. Use the schedule service page to request an appointment.

• Service location: 8665 West Bell Road.
• City: Peoria, AZ 85382.
• Schedule online before visiting.

The truck is offered with rear-wheel drive or four-wheel drive, and its suspension configuration can affect which adjustments are available. For that reason, the service does not treat every angle as adjustable on every vehicle. Where the suspension allows, the technician returns the measured angles to factory specification. Tire, steering, and suspension inspection is important because worn components can cause an alignment to move out of specification again.

Symptoms such as an off-center steering wheel, pulling on a flat road, or faster wear on one tire edge deserve attention. A measurement can show whether the angles require adjustment and whether another condition needs review first. Bring your 2027 Ram 2500 to Larry H. Miller Dodge Ram Peoria in Peoria for a factory-spec alignment — schedule service.

Alignment service at Larry H. Miller Dodge Ram Peoria measures camber, caster, and toe on all four wheels and checks the tires, steering, and suspension components that influence the result. The current angles are compared with the manufacturer's specification for the 2027 Ram 2500, and adjustment is made where the suspension allows. This gives you information about the truck's actual condition before an adjustment is recommended.

For service in Peoria, visit Larry H. Miller Dodge Ram Peoria at 8665 West Bell Road, Peoria, AZ 85382. Call 623-400-7471 or schedule service online for your alignment inspection.